Carving Accessories

Professional Carving Bars

Professional Carving Bars

Choose from our very popular Woodsman Carver™ or the Sugi-Hara Pro Carving bar. Both are made of high quality steel and have stellite welded around the nose area to reduce wear. 8" and 12" bars are designed to run 1/4" pitch chain only, and fit almost all small mount saws. Our 16" bar runs best with 1/4" chain (85 drive links), but other small pitch chains will work. 16" Carving bars fit Echo®, Poulan®, Stihl®, Makita® electric and small Husky saws only. Most saws use the drive link configuration noted, but there are some exceptions.
Description Item #
8" Woodsman Carver™ (48 D.L./Dime) 12508
12" Pro Carving Bar (64 D.L./Dime) 12501
12" Woodsman Carver™ (63 D.L./Dime) 12500
16" Woodsman Carver™ (85 D.L./Quarter) 12550

1/4

1/4" Pitch Drive Sprockets

If your saw does not come equipped with a 1/4" pitch sprocket you will need to convert it so you can use the proper carving chain. Some saws require a special clutch removal tool to take off drive sprocket systems. NOTE: *Requires a clutch removal tool.
Description Item #
Echo® 3000- 3450, 341,346 CSP 359K8*
Husky 340, 345, 346, 350, 351 CSP 346K9
Husky 36, 41, 136, 141 CSP 266K8*
Husky 335 CSP 272K8
Stihl® 017, 021, 023, 025 CSP 084K8
Clutch Tool for Echo® 10610

1/4

1/4" Pitch Rim Sprockets

These rims will allow your chain to line up perfectly with the groove in your bar. Requires a small spline configuration (the interior diameter is approximately 3/4"), which is common in most small saws. Please ask a salesman if a rim & drum system is available for your saw.
Description Item #
1/4" Pitch Rim Sprocket CSR 14